 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CORCOM Product Guide Inductive Filtering Modular RJ Jacks L Series UL Recognized CSA Certified RJ11 RJ11 with Block Filter RJ45 with Sleeve Filter RJ45 Specifications Contacts: Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (500 mating cycles) Ferrites: Type: Sleeves: Block: Shield Material: Housing Material: High resistivity, nickel zinc ceramic Single-aperture cylinders Multi-aperture rectangular prism Tin-plated copper alloy Glass-filled polyester (UL94V-0) 1000 VAC for 60 seconds 1 lb. minimum 20 lb. minimum Phosphor Bronze 50 microinches gold 100 microinches nickel 20 milliohms max. 30 milliohms max. L Series Inductive filtering in a direct retrofit to standard unfiltered RJ11, RJ45, or handset jacks. Offered with standard ferrite sleeve inductors or higher performance ferrite blocks, the L series is available with or without a shield. Part Numbers Inductor Filter RJH-4L-B RJ11-2L-S RJ11-2L-B RJ11-4L-S RJ11-4L-B RJ11-6L-S RJ11-6L-B Inductor Filter and Shield RJ11-2L2-B RJ11-4L1-S RJ11-4L1-B RJ11-4L2-S RJ11-4L2-B RJ11-6L1-S RJ11-6L1-B RJ11-6L2-S RJ11-6L2-B RJ45-6L-S RJ45-6L-B RJ45-8L-S RJ45-8L-B Dielectric Withstanding Voltage: Line-to-line and line-to-ground Printed Circuit Board Retention: Before soldering: After soldering: RJ45-6L1-S RJ45-6L1-B RJ45-6L2-S RJ45-6L2-B RJ45-8L1-S RJ45-8L1-B RJ45-8L2-S RJ45-8L2-B Model dimensions and PC board layout on pages 170 to 174. Signal Line Products Typical Impedance in Ohms 150 140 130 120 110 100 90 Impedance in Ohms 80 70 60 50 40 30 20 10 0 1 25 100 Frequency in MHz 200 500 Shield 2 Shield 1 See page 167 for the CORCOM new low profile RJ Jacks. 175 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide L Series - Ganged Version L - Ganged Series 6RJ11 UL Recognized CSA Certified 4RJ11 2RJ11 with Block Filter L - Ganged Series Ganged version of our L series filtered jacks. Available in RJ11 models with block inductors in gangs of 2, 4, or 6. Retrofits existing unfiltered ganged jack footprints. Specifications Contacts: Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (500 mating cycles) Ferrites: Type: Block: Housing Material: High resistivity, nickel zinc ceramic Multi-aperture rectangular prism Glass-filled polyester (UL94V-0) 1000 VAC for 60 seconds 1 lb. minimum 20 lb. minimum Phosphor Bronze 50 microinches gold 100 microinches nickel 20 milliohms max. 30 milliohms max. Typical Impedance in Ohms 150 140 130 120 110 100 90 Impedance in Ohms 80 70 60 50 40 30 20 10 0 1 25 100 Frequency in MHz 200 500 Dielectric Withstanding Voltage: Line-to-line and line-to-ground Printed Circuit Board Retention: Before soldering: After soldering: Model Dimensions and PC Board Layout .470 11.94 A .050 1.27 Part Numbers B C .325 8.25 .050 [1.27] .100 2.54 .030 - .003 Dia. .250 .350 [8.89] [6.35] .128 + .003 Dia. + .008 2RJ11-6L-B 4RJ11-6L-B 6RJ11-6L-B D .810 20.57 Ports 2 4 6 .590 14.99.040 1.02 .195 .410 10.41 .165 4.19 A .99 25.15 1.93 49.02 2.87 72.9 B .87 22.1 1.81 45.97 2.75 69.85 C .795 20.19 1.735 44.07 2.675 67.95 D .87 22.1 1.81 25.97 2.75 69.85 176 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions Standard Profile RJ Jack Dimensions For the L, LC, LCT and X Series of RJ Jack Filters RJ11 (No Shield) .620 15.75 .520 13.21 .810 20.57 RJ11 (Style 2 Shield) .900 22.86 .800 20.32 .590 14.99 .780 19.81 .040 1.02 .165 4.19 .195 4.95 .165 4.19 .04 1.02 .165 4.19 .195 4.95 .322 8.19 .395 10.03 .322 8.18 .485 12.32 6 4 2 5 3 1 .520 13.21 6 4 2 5 3 1 .540 13.72 Part Numbers RJ11-2L-S RJ11-4L-S RJ11-6L-S RJ11-2L-B RJ11-4L-B RJ11-6L-B RJ11-2X RJ11-4X RJ11-6X Part Numbers RJ11-2LC2-S RJ11-4LC2-S RJ11-6LC2-S RJ11-2LC2-B RJ11-4LC2-B RJ11-6LC2-B RJ11-4L2-S RJ11-6L2-S RJ11-4L2-B RJ11-6L2-B RJ11-6LCT2-S RJ11-6LCT2-B RJ11 (Style 1 Shield) .840 21.34 .900 22.86 .860 21.84 RJ11 (PC Board Layout) .780 19.81 .04 1.02 .195 4.95 .165 4.19 .165 4.19 .322 8.18 .485 12.32 6 4 2 5 3 1 .540 13.72 Shown from Component Side For all RJ11 L, LC, LCT and X Series Models Part Numbers RJ11-2LC1-S RJ11-4LC1-S RJ11-6LC1-S RJ11-2LC1-B RJ11-4LC1-B RJ11-6LC1-B RJ11-4L1-S RJ11-6L1-S RJ11-4L1-B RJ11-6L1-B RJ11-6LCT1-S RJ11-6LCT1-B 182 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters RJ45 (No Shield) .700 17.78 .600 15.24 .810 20.57 RJ45 (Style 2 Shield) .900 22.86 .800 20.32 .540 13.72 .04 1.02 .165 4.19 .780 19.81 .04 1.02 .195 4.95 .165 4.19 .165 4.19 .195 4.95 .322 8.18 .395 10.03 .322 8.18 .485 12.32 8 7 6 5 4 3 2 1 7 6 5 4 3 2 1 .620 15.75 8 Part Numbers RJ45-6L-S RJ45-8L-S RJ45-6L-B RJ45-8L-B RJ45-6X RJ45-8X Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-S RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-B RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B RJ45 (Style 1 Shield) .920 23.37 .900 22.86 .860 21.84 RJ45 (PC Board Layout) .322 8.18 .350 8.89 .250 6.35 .076.003 Dia. 1.93.08 (4 PLACES) .030 +.008/.003 Dia. .76 +.20/-.08 (8 PLACES) Signal Line Products 1 .780 19.81 .04 1.02 .195 4.95 .165 4.19 .165 4.19 .450 11.43 3 5 7 2 4 6 8 .050 1.27 (7 SPACES) .322 8.18 .485 12.32 .210 5.33 .345 8.76 .090 .050 2.29 1.27 .128.003 Dia. 3.25.08 (4 PLACES) 8 7 6 5 4 3 2 1 .620 15.75 Shown from Component Side For all RJ45 L, LC, LCT and X Series Models. Part Numbers RJ45-6LC1-S RJ45-6L1-S RJ45-8LCT1-S RJ45-8LC1-S RJ45-8L1-S RJ45-8LCT1-B RJ45-6LC1-B RJ45-6L1-B RJ45-8LC1-B RJ45-8L1-B Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-B RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-S RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B 183 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters RJH (No Shield) .540 13.72 .440 11.18 .810 20.57 Low Profile RJ Jack Dimensions For the N and Z Series of RJ Jack Filters RJ11 (Low Profile - No Shield) .620 15.75 .520 13.21 .710 18.03 .590 14.99 .485 12.32 .04 1.02 .165 4.19 .010 .25 .135 3.43 .195 4.95 .322 8.18 .395 10.03 .217 5.51 .400 10.16 6 4 5 3 1 4 3 2 1 .250 6.35 2 .520 13.21 Part Numbers RJH-4-L-B .350 8.89 Part Numbers RJ11-6N-B RJ11-6N-S RJ11-6Z RJH (No Shield - PC Board Layout) .322 8.18 .350 8.89 .030 +.008/-.003 Dia. .76 +20/-.08 (4 holes) RJ11 Low Profile (Style 3 Shield) .910 Max. 23.11 .740 18.80 .250 6.35 Edge of board .300 7.62 1 3 2 4 .075 1.91 .050 1.27 (3 Spaces) .515* 13.08 .010 .25 .120 3.05 .135 3.43 .165 4.19 .217 5.51 .430 10.92 .128.003 Dia. 3.25.08 (2 holes) Shown from Component Side All tolerances 0.010 [0.25] unless otherwise noted. Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 6 4 2 5 3 1 .550 13.97 *To top of shield 184 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ11 Low Profile (Style 4 Shield) .620 15.75 .740 18.80 RJ45 Low Profile (No Shield) .910 Max. 23.11 .740 18.80 .515 13.08 .515* 13.08 .010 .25 .120 3.05 .010 .25 .217 5.51 .430 10.92 .135 .165 3.43 4.19 .120 3.05 .135 3.43 .165 4.19 .217 5.51 .430 10.92 6 4 2 5 3 1 6 .550 13.97 4 2 5 3 1 .550 13.97 Part Numbers RJ11-6N4-B RJ11-6N4-S RJ11-6Z4 Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 RJ11 Low Profile (PC Board Layout) .076.003 1.93.08 Dia. (2 PLACES) .217 5.51 .350 8.89 .250 6.35 2 4 6 1 3 5 .030 + .008/- .003 Dia. .76 +.20/-.08 (6 PLACES) RJ45 Low Profile (Style 3 Shield) .99 Max. 25.15 .740 18.80 .400 10.16 .050 (5 SPACES) 1.27 .515* 13.08 Signal Line Products .120 3.05 .135 .165 3.43 .4.19 .080 2.03 .120 3.05 .128.003 Dia. 3.25.08 (2 HOLES) .075 1.91 .217 5.51 .430 10.92 8 7 6 5 4 3 2 1 .630 16.00 Shown from Component Side For all RJ11 N and Z Series Models Part Numbers RJ45-8N3-B RJ45-8N3-S RJ45-8Z3 *To top of shield 185 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ45 Low Profile (Style 4 Shield) .700 17.78 .740 18.80 .515* 13.08 .010 .25 .120 3.05 .135 3.43 .165 4.19 .217 5.51 .430 10.92 8 7 5 3 1 6 4 2 .630 16.00 Part Numbers RJ45-8N4-B *To top of shield RJ45-8N4-S RJ45-8Z4 RJ45 Low Profile (PC Board Layout) .076.003 Dia. 1.93.08 (2 Places) .217 5.51 .350 8.89 .250 6.35 1 .450 11.43 3 5 7 .095 2.41 .120 3.05 2 4 6 8 .050 1.27 .128.003 Dia. 3.25.08 (2 Places) .030 +.008/-.003 Dia. .76 +.20/-.08 (8 Places) .050 (7 Spaces) 1.27 Shown from Component Side For all RJ45 N and Z Series Models All tolerances 0.010 [0.25] unless otherwise noted. 186 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com |
Price & Availability of RJ11-2L-B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |